In this video, we take look at the all-new ASUS Tinker Edge R Single Board Computer.
Powered by a 6 Core RK3399 Pro backed by 4Gb of LPDD4 Ram this SBC is capable of Running Debian/Linux and Android! So is this board any good? In this video, we test out Android 9 and Debian 9 on the new Tinker Board Edge R to see how it performs with overall usability Video Playback, Gaming, and Emulation.
Personally, I can’t wait to get my hands on the Tinker Board 2 but in the meantime, we can get a feel for how it might perform by testing out the Edge R.
Buy It on Amazon: https://amzn.to/3aLwEBD
Learn More Here: https://tinker-board.asus.com/product/tinker-edge-r.html
03:04-Edge R Specs
08:33- Gamecube Dolphin
11:15-Linux YouTube Test
Tinker Edge R Specs:
SoC: Rockchip RK3399ProCPUDual-core ARM® Cortex®-A72 @ 1.8 GHz
Quad-core ARM® Cortex®-A53 @ 1.4 GHz
GPU: ARM® Mali™-T860 MP4 GPU @ 800 MHz
Rockchip NPU, Display1 x HDMI™ with CEC hardware ready
1 x USB Type-C® (DP)
1 x 22-pin MIPI DSI (4 lane)Memory SizeDual-CH LPDDR4 4GB (SYSTEM)
LPDDR3 2GB (NPU)Storage16GB eMMC
Micro SD(TF) card slot (push/pull)Connectivity1 x RTL8211F-CG GbE LAN
1 x M.2 802.11 a/b/g/n/ac wireless & Bluetooth 5.0 (2T2R)Audio1 x 3.5mm audio jack (with Mic & plug-in detection)
1 x S/PDIF TX pin
1 x PCM/I2S pinsUSB3 x USB 3.2 Gen1 Type-A
1 x USB 3.2 Gen1 Type-C OTGCamera Interface1 x 22-pin MIPI CSI-2 (4 lane)
1 x 22-pin MIPI CSI-2/DSI (4 lane) *Expansions1 x Mini PCIe slot (Full-Length, nano-SIM socket, for 4G/LTE)Internal Headers1 x 40-pin headers includes:
– up to 28 x GPIO pins
– up to 2 x SPI bus
– up to 2 x I2C bus
– up to 2 x UART
– up to 3 x PWM
– up to 1 x PCM/I2S
– up to 1 x S/PDIF TX
– 2 x 5V power pins
– 2 x 3.3V power pins
– 8 x ground pins
1 x 2-pin Recovery header
1 x 2-pin Power-on header
1 x 2-pin Reset header
1 x 2-pin DC Fan header
1 x 2-pin RTC Battery header
1 x 2-pin NPU UART headerPower Connector
(up to 65W)1 x 12~19V DC Power Input Jack (5.5/2.5mm)
1 x 12~19V 4-pin DC Power Input HeaderOS SupportDebian 9 / Android 9DimensionPico-ITX, 3.9 inch x 2.8 inch (100 × 72 mm)EnvironmentOperation temperature: 0℃ ~ 55℃
Non operation temperature: -40℃ ~ 80℃
Non operation humidity: 0% ~ 85% (Non condensing)Note* 3 MIPI interface, 1st CSI, 2nd DSI, and 3rd is CSI/DSI.
Follow Me On Twitter: https://twitter.com/theetaprime
Follow Me On Instagram: https://www.instagram.com/etaprime/
Equipment I Use:
Screen Capture Device: https://amzn.to/2STpX4C
Tool Kit: https://amzn.to/2M6l9WS
Soldering Station: https://amzn.to/2FtdVeu
Raspberry Pi 4: https://amzn.to/3cCrvKb
Flirc Case: https://amzn.to/2OBQTXz
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission at no extra cost to you!
This video and Channel and Video are for viewers 14 years older and up. This video is not made for viewers under the age of 14. If you are under 14 years of age, you do not have permission to view this video.
Want to send me something?
12520 Capital Blvd Ste 401 #108
Wake Forest, NC 27587 US
THIS VIDEO IS FOR EDUCATIONAL PURPOSES ONLY!
#SBC #ASUS #Tinker #etaprime